Lee Pro 1000 Progressive Reloading Press

Description:

Full setup with lots of additional parts and spares (full list below). Minor surface rust can be cleaned off with some steel wool and WD40. Otherwise all set to go with powder, brass and projies.

Lee Pro1000 Progressive Reloading Press
- [ ] 9 mm dies (on 3-hole Quick change turret)
- [ ] .38 Super dies (on 3-hole quick change turret) (missing part on crimping die)
- [ ] .38 Special (on 3-holes quick change turret)
- [ ] 2 x 9mm/.38 Super Complete Shell Plate Carrier
- [ ] 2 x .38 Special/.357 Magnum Complete Shell Plate Carrier
- [ ] 9mm /.38 Super Case feeder
- [ ] .38 Special/.357 Magnum Case feeder
- [ ] Case Collator
- [ ] Load Master Bullet Feeder Kit
- [ ] Auto Disc measure Powder tower with charge discs (A-D; B installed)
- [ ] Spare/Replacement Small Case and Regular Case Feeder tubes
- [ ] Spare Primer attachment Conversion kit
- [ ] 4 x Primer Cassettes
- [ ] 3 x 3-Hole Quick Change Turret Blanks
- [ ] Universal De-Capping Die
- [ ] Micrometer Adjustable Charge bar (.28 cc - 1.6cc)
- [ ] #1 Shell Plate
- [ ] #19 Shell Plate
- [ ] 2 x Swivel adapters
- [ ] 2 x Auto Disk Pullback Lever Kits
- [ ] 2 x 7/8 Finger Tighten Lock Rings
- [ ] 2 x Cutter & Lock studs
- [ ] 3 x Primer Pocket cleaners
- [ ] 3 x Universal De-Capping tool pins
- [ ] single stage Shell Holders #1 & #19
- [ ] Safety Powder Scale
Replacement parts:
- [ ] AO1688
- [ ] AD2749
- [ ] TR2452A
- [ ] TR2549
- [ ] TR2433
- [ ] TR2443
- [ ] TR2550
- [ ] TP2115
- [ ] TR2434
- [ ] TR2479
- [ ] TR2548
- [ ] TR2437
- [ ] TR2432