$2,200.00
S&W 1911 9mm Pro Series IPSC Setup
- Condition:
- Make:Smith & Wesson
- Model:1911 9mm Pro Series
- Ammo Type:Centrefire
- Action Type:Semi Automatic
- Bore Diameter:0.355
- Calibre:9x19mm Parabellum
- Serial Number:UCK4603
Private User
| Seller Type: | Private User Licence # 30026528-04 |
|---|---|
| Location: | CAPALABA, QLD, 4157 |
| Transferring Dealer: | rebel gun works, QLD, 4102 Licence # 50000288 |
| View other listings from this seller | |
Description:
9mm 1911 Pro Series S&W and accompanying gear and spares.
Bought in 2011 (100 years of 1911!) Low rounds through it (3000 or so). Flawlessly reliable, ask the competition at my IPSC comps.
Kept clean and lubed after every shoot.
It comes with:
5 Wilson Combat 10-round magazines with metal replacement followers. (The original polymer followers are also included.)
1 x Blade-Tech Kydex holster with Tek-Lok attachment.
1 x Blade-Tech dropped and offset holster attachment to allow you to drop the holster lower and space it out from the belt a little.
1 x Blade-Tech 2x2 1911 magazine carrier with Tek-Lok attachment. Keeps all the mags in the same spot.
The Tek-Lok attachments are adjustable for belt width with an insert you can remove and move to a different slot.
4 x new, unopened Wolff #14 "reduced power" recoil springs with firing-pin springs. (Reduced power is for 45ACP; they are standard springs for 9mm.)
2 x used #14 springs and firing-pin springs. (Still plenty of life, changed as preventative maintenance.)
1 x #12 and 1 x #13 used recoil and firing-pin springs. I used these a little a few years ago for testing lighter loads. I didn't make IPSC power factor so I went back to standard springs and loads after testing. They have very little use on them.
Comes with the S&W hard case and manual, bushing wrench, lock.
